Topseller
Item number:
194676
Cable bridge with 5 ducts, interconnectable, HxWxD 50 x 900 x 500 mm, black/yellow
The ideal solution for protecting cables and hoses
Technical details
Cable bridge with 5 ducts, interconnectable, HxWxD 50 x 900 x 500 mm, black/yellow
-
BrandMORAVIA
-
Drive-over speed5 - 10 km/h
-
Element typeMain element
-
Length930 mm
-
Load max.28 t
-
MaterialRecycled rubber
-
Middle duct length900 mm
-
Middle duct width36 mm
-
Net weight11,5 kg
-
No. of channels5
-
SectionPerformance
-
Speed humps typeCable bridges
-
Surfacefluted
-
Traverse height50 mm
-
Width590 mm
Item description
Cable bridge with 5 ducts, interconnectable, HxWxD 50 x 900 x 500 mm, black/yellow
Cable bridges are suitable for a wide range of applications – be it on construction sites, in warehouses, shopping centres, at trade fairs or events. The interconnectable cable bridge with 5 ducts can withstand loads of up to 8 t.
- Made from a special, vulcanised solid rubber compound
- 5 cable ducts (WxH): 38 x 35 mm
- Drive-over height 50 mm
- Load-bearing capacity of up to 8 t
- Chequered, non-slip surface
Ideal for preventing cable breaks and avoiding trip hazards
The interconnectable cable bridge with 5 ducts enables safe driving over cables, small hoses or pipes. The cable bridge is made from a special, vulcanised solid rubber compound and has a high signal effect thanks to the yellow polyethylene cover. Thanks to the special connecting system, the element can be expanded as necessary so that any number of cable bridges can be joined together. The interconnectable cable bridge with 5 ducts easily withstands axle loads of up to 8 t, though crossing the element with HGVs should be avoided. Integrated anchor points allow the cable bridge to be secured to the ground for long-term use.
Avoid cable breaks and trip hazards by ordering the interconnectable cable bridge with 5 ducts from our shop.
The interconnectable cable bridge with 5 ducts enables safe driving over cables, small hoses or pipes. The cable bridge is made from a special, vulcanised solid rubber compound and has a high signal effect thanks to the yellow polyethylene cover. Thanks to the special connecting system, the element can be expanded as necessary so that any number of cable bridges can be joined together. The interconnectable cable bridge with 5 ducts easily withstands axle loads of up to 8 t, though crossing the element with HGVs should be avoided. Integrated anchor points allow the cable bridge to be secured to the ground for long-term use.
Avoid cable breaks and trip hazards by ordering the interconnectable cable bridge with 5 ducts from our shop.
Ähnliche Produkte
Topseller
Cable bridge, plug-in
- Hard-wearing thanks to its special solid rubber compound
- The cable bridge can be plugged in and can therefore be extended as required
- Surface is ribbed and non-slip
10 Working days
£150.00
Topseller
HEMMDAL cable bridge
- Made from recycled rubber
- 1 cable duct, Ø 20 mm
- Very low drive-over height: 30 mm
10 Working days
£170.00
Topseller
Small cable bridge, for cables and hoses up to ø 45 mm
- Thanks to the high-strength rubber compound, the cable bridge can be driven over
- Non-slip surface for easy driving over
- Underside has non-slip rubber lips
10 Working days
£74.00