MORAVIA impact protector for edges, circular, slip-on, HxW 40 x 40 mm, length 1 m

This slip-on, circular impact protector reduces the injury risk posed by edges and profile strips.The black/yellow impact protector is quick and easy to install, wherever you require.

Slip-on, circular impact protector – quick installation and lasting performance

Secure danger zones in indoor and outdoor areas using this impact protector with circular profile.This standard protective element is an ideal safety solution for production halls and warehouses.The black and yellow contrasting stripes offer a high signal effect.The slip-on guard profile is very quick and easy to install.It provides a simple way of reducing the risk of impact injuries and vehicle collision damage.
The impact protector with circular profile is made from flexible polyurethane foam.You can simply cut it to the required length using a sharp knife.The cut edges are non-porous and satisfy the highest hygiene standards.If necessary, you can use standard commercial adhesive to ensure additional bonding strength.When installing the impact protector in this way, the surface must be cleaned and degreased.The impact protector is suitable for both indoor and outdoor use.It is temperature-resistant from -40 to +90°C, non-fading and very easy to clean.

Enhance the safety of your traffic routes and working areasby ordering the slip-on, circular impact protector from our shop.