Free consultation
0800 141 22 68 0800 141 22 68

Technical details

Rubber speed bump, < 10 km/h, closure element, yellow

  1. Brand
    MORAVIA
  2. Element type
    Closure element
  3. Farbe
    yellow
  4. Height
    70 mm
  5. Length
    405 mm
  6. Material
    Rubber
  7. Net weight
    3,25 kg
  8. Section
    Performance
  9. Speed humps type
    Speed bumps
  10. Suitable for speed up to
    10 km/h
  11. Width
    210 mm

Item description

Rubber speed bump, < 10 km/h, closure element, yellow

The rubber speed bumps ensure that the maximum speed is maintained at your site.
  • Speed bump for speeds of 10 km/h or 20 km/h
  • Ensure traffic calming and less traffic noise
  • Rubber material protects tyres
In-house traffic calming using speed bumps

Speed bumps enable you to regulate the speed on at your site. Over short stretches they are suitable for temporary traffic calming. On longer traffic routes, it is recommended that the speed bumps are installed at regular intervals. As the speed bumps reduce speed, they simultaneously produce a lower noise level.
The speed bumps are available in 2 versions: For traffic calming at 10 km/h or 20 km/h. Their dimensions are 405x210x70 mm (LxWxH).

Order the rubber speed bumps from our shop.

Ähnliche Produkte

Recycled speed bump
  • Recycled rubber
  • Available as a base or closure element
  • Tried-and-tested non-slip profile

10 Working days

Hard Rubber Curb Ramp
  • Weather-resistant hard rubber
  • up to 40 t durable, non-slip surface
  • 2 cable recesses

10 Working days

SafeRide® speed bump
  • Recycled rubber
  • Available as a base or closure element
  • Tried-and-tested non-slip profile

10 Working days

Passenger car speed bump
  • Recycled rubber
  • For speeds of 5 to 10 km/h
  • Load-bearing capacity of up to 40 t

10 Working days

2C adhesive for HEMMDAL speed bump
  • 2C adhesive, resin-based
  • Adhesive and hardening agent
  • For permanent bonding

10 Working days

Alignment bar for speed bumps
  • Corrosion-resistant alignment bar with hot-dip galvanising
  • From a length of 3 m division into sections
  • Adjustments possible on site

10 Working days

Universal dowel with screw
  • Plastic dowel
  • Hexagonal steel screw

10 Working days

10 Working days

Do you have any questions?